DMS1B2/6060/KSafeseal B125 manhole cover 600mm x 600mm clear opening with 40mm frame depth
Superseded byManhole covers - Square
SpecificationGeneral information
Standards, classes and groupings
Dimensions
Accessories
NotesAll values stated are nominal within 2.5% tolerance.Knowledge base
Knowledge Base / Access Solutions / Standards and conformity National Highways skid resistance requirements CD 534 v0.1.0 contains changes to skid resistance test requirements that are now based on a WRc test method for BS EN 124-conforming coarse textured cover surfaces. This article guides you through the test and Wrekin's conformance. 
Knowledge Base / Access Solutions / Standards and conformity Understanding BS EN 124 groups and classes BS EN 124:2015 divides access covers and gully grates into classes by static test load. It also categorises the various places where they may be installed from Group 1 to Group 6. This article will guide you through the groups and classes. 
Knowledge Base / Access Solutions / Product guidance On-site coating of ductile cast iron parts Where the loss of barrier coatings has occurred, usually through trafficking and/or light corrosion, a site-applied paint coating may be successfully brush-applied to refresh the surface finish of ductile iron parts. 
Knowledge Base / Access Solutions / Standards and conformity Specifying Products under BS EN 124 The BS EN 124 standard serves as a general guide for determining the stability of products, and it outlines the parameters for different classes of products in terms of static load tests. However, it doesn't offer much specific information about the dynamic loads that various traffic conditions on modern road systems can impose. 1. Wrekin Products Ltd is continually seeking to improve our products and therefore reserves the right to alter product specifications without prior notice. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
