FasTrack™

Woven geotextile range

FasTrack™ is a market leading brand of woven geotextile fabrics, manufactured using a range of different polymers, strengths and weave patterns.

Wrekin offer 2 specific types of woven geotextile fabric: Standard Grade and High Flow (HF).

FasTrack™ woven geotextile fabrics are specified by both civil and marine engineers most commonly for soil separation and the reinforcement of aggregate layers.

Applications for ground stabilisation include roads, railways, foundations, embankments and coastal defences.

Key features:

Separation – Prevents intermixing of dissimilar soil laye
Filtration – Allows passage of fluids whilst retaining soil particles
Reinforcement – Resists stresses or reduces deformations
Erosion Control

Woven geotextiles provide a cost effective solution for the separation of granular fill materials and for the provision of sub structure support. The most common application is use as a separating layer beneath roads, helping to prevent rutting through separation and providing tensile support.

Woven vs Non-woven:

A graph comparing the tensile strength versus mass per unit weight of woven and non-woven Geotextile. Woven geotextiles typically offer greater mechanical strength per unit weight than comparable non-woven grades, providing a cost effective solution for a vast range of applications.

Woven geotextiles provide maximum strength for minimum cost

 FasTrack™ SG Range Properties:

Lightweight

Mechanical Properties:

Mechanical
Properties
Test Units 18/9 18/18-DS 18/18 20/20 27/27 30/30 36/40 40/40s 40/40s
Tensile
Strength
– MD
EN ISO 10319 kN/m 18 18 18 20 27 30 40 40 41
Tensile
Strength
– XD
EN ISO 10319 kN/m 16 18 18 20 27 30 40 40 41
Elongation
at break
– MD
EN ISO 10319 % 22 22 26 22 30 17 20 20 20
Elongation
at break
– XD
EN ISO 10319 % 13 13 26 14 27 10 10 11 22
CBR
Puncture
Resistance
EN ISO 12236 N 1800 1900 2500 2350 3800 3110 4100 4800 4800
Dynamic
Cone
Drop
EN 918 mm 21 26 22 20 22 19 15 11 10

Hydraulic Properties:

Hydraulic Properties Test Units 60/52 60PL/52P 60/60  60P/60PL 80/80  80P/80PL 100/100 200/50L 40/40s
Characteristic
Opening Size
EN ISO 12956 μm 260 210 305 250 600 540 350 180 305
Hydraulic
Velocity
EN ISO 11058 m/s 25 x 10 17 x 10 23 x 10 23 x 10 32 x 10 29 x 10 23 x 10 16 x 10 18 x 10
Permeability EN ISO 11058 l/m².s 25 17 23 23 32 29 23 16 18

Physical Properties:

Physical Properties Test Units  60/52 60PL/52P  60/60 60P/60PL 80/80 80P/80PL 100/100 200/50L 40/40s
Thickness
under
2 kPa
EN 964/1 mm 0.35 0.35 0.35 0.35 1.10 0.75 0.80 0.70 0.85
Weight EN 965 g/m² 75 73 87 87 155 124 165 166 224
Roll
Width
n/a cm 450 525 525 525 525 525 525 525 525
Roll
Length
n/a m 200 200 200 200 200 200 200 100 100
Full load
volume
(+/- 10%)
n/a 182250 124950 124950 124950 66150 74550 66150 52500 45150
Roll
Diameter
(+/- 10%)
n/a cm 24 24 24 32 40 38 43 35 35

Heavyweight

Mechanical Properties:

Mechanical
Properties
Test Units  60/52 60PL/52P 60/60 60P/60PL  80/80 80P/80PL 100/100 200/50L
Tensile
Strength
– MD
EN ISO 10319 kN/m 60 60 65 65 82 82 110 240
Tensile
Strength
– XD
EN ISO 10319 kN/m 58 58 60 60 86 86 110 54
Elongation
at break
– MD
EN ISO 10319 % 20 20 21 21 20 20 20 13
Elongation
at break
– XD
EN ISO 10319 % 11 11 10 10 11 11 11 10
CBR
Puncture
Resistance
EN ISO 12236 N 1500 16 16 16 16 9500 12500 9200
Dynamic
Cone
Drop
EN 918 mm 14 14 7.5 7.5 10 10 10 12.7

Hydraulic Properties:

Hydraulic Properties Test Units 60/52 60PL/52P  60/60 60P/60PL 80/80 80P/80PL 100/100  200/50L
Tensile Strength
– MD
EN ISO 12956 μm 500 500 275 275 300 300 190 400
Tensile Strength
– XD
EN ISO 11058 m/s 58 x 10-3 58 x 10-3 16 x 10-3 16 x 10-3 18 x 10-3 18 x 10-3 13 x 10-3 18 x 10-3
Elongation at break
– MD
EN ISO 11058 l/m².s 58 58 16 16 18 18 13 18

Physical Properties:

Physical Properties Test Units 60/52 60PL/52P 60/60 60P/60PL 80/80 80P/80PL  100/100  200/50L
Thickness under
2 kPa
EN 964/1 mm 500 500 275 275 300 300 190 400
Weight EN 965 g/m² 58 x 10-3 58 x 10-3 16 x 10-3 16 x 10-3 18 x 10-3 18 x 10-3 13 x 10-3 18 x 10-3
Roll
Width
n/a cm 58 58 16 16 18 18 13 18
Roll
Length
n/a m 100 100 100 100 100 100 100 100
Full load volume
(+/- 10%)
n/a 40950 40950 40950 40950 32550 32550 30450 29870
Roll Diameter (+/- 10%) n/a cm 40 40 40 40 42 42 45 45

FasTrack 609 Properties:

Mechanical Properties:

Mechanical Properties Test Units 18/9
Tensile Strength – MD EN ISO 10319 kN/m 16
Tensile Strength – XD EN ISO 10319 kN/m 11.5
Elongation at break – MD EN ISO 10319 % 18.5
Elongation at break – XD EN ISO 10319 % 18.5
CBR Puncture Resistance EN ISO 12236 N 1500
Dynamic Cone Drop EN 918 mm 21

Hydraulic Properties:

Hydraulic Properties Test Units 60/52
Characteristic Opening Size EN ISO 12956 μm 2650
Permeability EN ISO 11058 l/m².s 250

Physical Properties:

Physical Properties Test Units  60/52
Thickness under 2 kPa EN 964/1 mm 0.4
Weight EN 965 g/m² 75
Roll Width n/a cm 450
Roll Length n/a m 100
  • Applications:

    •  Roads, car parks & indusrtial areas
    • Areas of hard standing
    • Stone foundations for new buildings
    • Granular fill from sub soils and other fill

    Benefits:

    • Reinforcement – Resists stresses or reduces deformations
    • Separation – Prevents intermixing of dissimilar soil layers
    • Filtration – Allows passage of fluids whilst retaining soil particles
  • Downloads:

    FasTrack™ and MultiTrack™ equivalence tables

    272 KB | Version 2 | PDF format

    Download

    Wrekin Geosynthetics brochure

    3.57 MB | Version | PDF format

    Wrekin Geosynthetics brochure