
Our products Flood and odour control plate Our Flood and Odour Control Plate is an optional accessory which can be factory-fitted to Wrekin ductile iron access cover and frames. It is designed to provide the access cover frame with resistance to egress of chamber odours, flood water ingress and intermittent chamber pressures of up to 0.5 bar while allowing access to the chamber via a removable steel lid. Mild steel lid and sub-frame construction Does not affect Kitemark or other third party certification Zinc protection to mild steel. This product is not recommended for situations with prolonged internal or external pressure When specifying the use of Flood & Odour Control Plate with a particular Wrekin access cover, add a “PG” suffix to the access cover stock code shown in the catalogue, e.g. DMT0D4/6060/KTPG. Features Hot dipped galvanised for long life performance. Hot dipped galvanised for long life performance. More available accessories Armadillo Protects your ironwork during the construction phase, ensuring manhole covers and gully grates are ready to start their service life in as new condition. Clicklift Provides housing developers and contractors with huge savings in terms of time, money and hassle. Allowing whole estates to have their manhole covers raised to the final surfacing level, in as little as a few hours. Unipak A BBA HAPAS approved ironwork installation system that is designed to prevent bedding failure, one of the main factors contributing to premature failure of chamber tops. Gritblocker An anti-blockage keyway insert that simply fits into the manhole cover keyway, preventing debris from blocking the opening and allows a lifting key to be inserted. Screwlift Our rapid manhole frame levelling system and is suitable for use with nearly all of our D400 and E600 manhole covers and gully grates. Gully Chute Connector Our gully chute connectors are designed to fix below a grating or kerb type gully unit with a primary catchment chamber and spigot outlet for onward pipe connection. These are ideal where gully grates are offset to gully pots, or where direct surface run off is required. Sealing Plate Products are available in either a low-leak or no leak options. These products are designed to prevent surface water run off from entering the chamber and can be retrofitted to our Unite manhole covers (only stock codes ending KUE). Reducer ring Provide a second line of defence against chambers being accessed by unauthorised people or potential falls if accidentally left uncovered. Share this page

Our products

Flood and odour control plate

Our Flood and Odour Control Plate is an optional accessory which can be factory-fitted to Wrekin ductile iron access cover and frames. It is designed to provide the access cover frame with resistance to egress of chamber odours, flood water ingress and intermittent chamber pressures of up to 0.5 bar while allowing access to the chamber via a removable steel lid.

Mild steel lid and sub-frame construction
Does not affect Kitemark or other third party certification
Zinc protection to mild steel.

This product is not recommended for situations with prolonged internal or external pressure

When specifying the use of Flood & Odour Control Plate with a particular Wrekin access cover, add a “PG” suffix to the access cover stock code shown in the catalogue, e.g. DMT0D4/6060/KTPG.