Bespoke fabricated steel datasheets

Fabricated open mesh flooring is constructed from standard forge-welded panels. They are cut to the customer’s requirements, fully edged and supported in a substantial angle frame, with external fixing lugs.

Hinged open mesh flooring is constructed from standard forge welded panels. They are cut to customer’s requirements, fully edged and supported in a substantial angle frame, with external fixing lugs.

Multiple paving infill covers and frames can be manufactured to suit a wide range of clear opening and load classes.

Recessed covers and frames are for use in areas of block paving where it is desirable to have continuity of surface finish. They are recessed 100mm for use with up to 80mm block paving and galvanised to BS EN ISO 1461.

Suitable for use in heavy duty environments, such as areas where lorries and forklift traffic operate. They can be fully filled with concrete or partially filled with concrete and an alternative floor finish.

Multiple recessed covers and frames can be manufactured to suit a wide range of clear opening and load classes.

Recessed up to 55mm to be in-filled with a range of floor finishes; including, screed, concrete, tiles, wood, composite material.

Suited to town centre developments where replacement of existing service covers is required to facilitate infill with blocks or stone to match the surrounding area.

External hinged, spring assisted covers with externally hinged lids, locking devices and safety retaining stay bars. An economic solution where ease of access is essential, offering one man operation whilst remaining within lifting guidelines.

Multiple spring assisted covers provide an economic, multiple lid solution for larger chamber openings, while still providing access within the recommended lifting limits.

Spring assisted covers with anti-tamper internal hinges, locking devices and safety retaining stay bars. Widely used on both wet and
dry wells where ease of access is essential. Commonly supplied with fall protection grilles, including self-closing split pump through grilles for safer pump extraction.

Multiple spring assisted covers supplied as standard with anti-tamper internal hinges, locking devices, safety retaining stay bars and all necessary supporting steel work. Widely used on both wet and dry wells where ease of access to a large area is required.

Multiple solid top covers and frames can be manufactured to suit almost any chamber clear opening. Covers and frames are constructed from heavy gauge rolled steel plate and section and galvanised to BS EN ISO 1461 after fabrication.

Solid top covers and frames can accommodate any opening size up to 1000 mm square with a single lid, and up to 2000 mm x 1000 mm with twin lids. Weight loadings ranging from pedestrian access to areas of goods vehicle operation can be accommodated, with frame depths at 40 mm, 75 mm & 100 mm.

Surface mounting upstand covers and frames provide flood protection to the top of the frame, the depth of protection being increased by mounting the unit on a pre-built concrete upstand.