Home
My Wrekin

DMHT0E4/6767/KH

Highway HaloHinge E600 manhole cover 675mm x 675mm clear opening with 100mm frame depth

Specification Knowledge base

Stock code Range Clear opening
(mm)		 Overall frame
(mm)		 Frame depth
(mm)		 Options My Wrekin Downloads
DMHT0E4/6767/KH Highway 675 x 675 910 x 910 100

Features

  • Enlarged corners spread loads evenly across the foundation, enhancing reliability and lifespan.

    Enlarged frame corners

  • Optional ID badge supports RFID, NFC and IoT connectivity for asset identification and tracking.

    Retrofittable badge

  • Safety keyways prevent accidental lifting key disengagement during handling for safer operation.

    Safety keyway

  • Independently tested by a UKAS-accredited laboratory to achieve a PSRV value of 70+ on the chequer surface.

    PSRV tested

  • Strengthened corners dissipate loading stresses effectively, providing long-term durability and preventing damage to the frame and cover.

    Gussets icon

  • Directs forces vertically to convert traffic loads into mortar-compatible compression forces.

    Cover support geometry

  • Indexed corners ensure correct orientation and alignment first time, every time.

    Indexed corners

  • Integrated keyway frame lifting points provide safe and secure handling.

    Keyway lifting point in the frame

  • Frame holes allow mortar to flow through the flange, creating a strong mechanical bond for added stability.

    Mortar Apertures icon

  • Texturing above and below the flange improves mortar grip and reduces lateral movement and cracking.

    Textured mortar engagement flange surface

  • Non-rocking three-point suspension provides stable seating for silent, reliable operation.

    3 point suspension

  • Concealed hinges sit within the frame, protecting them during installation and preventing debris blockage.

    Inboard hinge icon

  • Hold covers securely open to prevent accidental closure during access.

    Safety stop hinges

  • Meets the requirements of CD 534 v0.2.0.

    CD 534 v0.2.0 logo

Images

Specification

General information

Stock code
DMHT0E4/6767/KH
Primary material
Ductile iron
Range
Highway
Category
Manhole cover
Flanges
4

Standards, classes and groupings

Standards
BS EN 124-2
DMRB
MCHW
BS7903
CD 534 v0.2.0
BS EN 124 Class
E600
BS EN 124 Group
4
Third party certified
Kitemark

Dimensions

Frame shape
Square
Manhole shape
Square
Overall frame (A x B)

910 mm x 910 mm
Clear opening (C x D)

675 mm x 675 mm
Frame depth (E)
100mm
Base opening (F x G)

700 mm x 700 mm

EPD Data

Total life cycle (cradle to grave)
218.68 kg CO₂ equivalent
Download EPD Data
BRE Greenbook Live
BRE Verified Logo

Available options

Accessories

Stock code Description My Wrekin
PC/UNIFORM/151076 Uniform chamber adjustment unit 760mm x 100mm x 15mm
PC/UNIFORM/251076 Uniform chamber adjustment unit 760mm x 100mm x 25mm
PC/UNIWEDGE/755012 Uniform support wedge 120mm x 50mm x 75mm
YPCR/U12.5 12.5Kg Unipak® rapid curing polyester resin mortar
YPCR/U25 25Kg Unipak® rapid curing polyester resin mortar
GRITBLOCKER Anti-blockage keyway insert
SCREWLIFT Simple and rapid manhole frame levelling system. Simply push the bushes into the holes in the flange and adjust the levelling screws to the required height.
KEY/LONG Large cover lifting keys with a long handle (sold as a pair)

Downloads

BIM model - DMHT0E4-6767-KH - 843.ifc
BIM File-Login required
Wrekin Manhole Cover Installation Guide.pdf
Instruction manual-pdf
PSRV Certificate of Conformance - 2025.pdf
Certificate-pdf
Kitemark Certificate.pdf
Certificate-pdf
Highway range specification clauses.pdf
Specification clause-Login required
Wrekin BRE Verified EPD Standard Range.pdf
Environmental Product Declaration (EPD)-Login required

Knowledge base

Knowledge Base / Frequently Asked Questions

Why do seal plates / flood & odour control plates (F&OCPs) have WiS leakage classifications?

Understand why seal plates / flood & odour control plates (F&OCPs) have WiS leakage classifications?
Access cover being installed

Knowledge Base / Frequently Asked Questions

Ductile iron access cover FAQs

Frequently asked question questions about our ductile iron access cover range of products.
Access solution being installed

Knowledge Base / Installation guides

Manhole cover frame installation do's and don'ts

Read our do's and don'ts for when installing a manhole cover frame
Access cover being installed

Knowledge Base / Installation guides

Access cover installation guide

Installation guide for ductile iron BS EN 124 access covers.
Access cover being installed

Knowledge Base / Standards and conformity

Specifying Products under BS EN 124

The BS EN 124 standard serves as a general guide for determining the stability of products, and it outlines the parameters for different classes of products in terms of static load tests. However, it doesn't offer much specific information about the dynamic loads that various traffic conditions on modern road systems can impose. 
Access cover installation

Knowledge Base / Standards and conformity

Operation and maintenance of BS EN 124 ironwork

The complete operation and maintenance (O&M) manual for all Wrekin BS EN 124 ironwork.
Access cover being installed

Knowledge Base / Standards and conformity

Sewers for adoption

Sewers for Adoption (7th edition) contains guidance for the design and construction of sewers that will be adopted by Sewerage Undertakers in England and Wales in accordance with Section 104 of the Water Industry Act 1991. This helpful guide will take you through what you need to know.
Access cover being installed

Knowledge Base / Product and specification guidance

Ductile iron product symbols

Guidance on the symbols and iconography displayed on Wrekin ductile ironwork.
Access cover being installed

Knowledge Base / Product and specification guidance

What information is on product labels?

A handy guide showing the information on our product labels. This information will help you identify what products you have when picking, packing or installing on-site.
Road resurfacing

Knowledge Base / Product and specification guidance

On-site coating of ductile cast iron parts

Where the loss of barrier coatings has occurred, usually through trafficking and/or light corrosion, a site-applied paint coating may be successfully brush-applied to refresh the surface finish of ductile iron parts.
Access cover being installed

Knowledge Base / Product and specification guidance

How manhole covers and gully grates are measured

Learn how to accurately measure manhole covers and gully grates with our helpful guide.
Access cover being installed

Knowledge Base / Installation guides

Manhole cover with flowable mortar installation guide

Installation guide for ductile iron BS EN 124 access covers when using a flowable mortar.
Access cover being installed

Knowledge Base / Product and specification guidance

Lifting arrangements

Our manhole covers provide multiple safe lifting provisions.
Access cover being installed

Knowledge Base / Standards and conformity

Understanding BS EN 124 groups and classes

BS EN 124:2015 divides access covers and gully grates into classes by static test load. It also categorises the various places where they may be installed from Group 1 to Group 6. This article will guide you through the groups and classes.
Road resurfacing

Knowledge Base / Product and specification guidance

ID badging and antenna options (RFID, NFC, IoT)

A large number of our Unite and Highway covers provide the facility for a retrofittable badge to be installed in the cover, without the need for welding. In addition, this location can also be used to install communications antennas within the cover, removing the need to adjust the surrounding road surface.

This article discusses the potential applications of this technology.
Access cover being installed

Knowledge Base / Standards and conformity

A guide to conformity marking and voluntary third-party certification

Helpful information that guides you through applicable conformity marking and voluntary third-party certification requirements in the UK.
Access cover being installed

Knowledge Base / Product and specification guidance

Surface oxidation on ductile iron castings

Guidance on surface oxidation on iron castings, including what our covers are coated with and why we do this.
Access cover being installed

Knowledge Base / Product and specification guidance

PSRV anti-slip and anti-skid resistance

Understand the difference between anti-slip and anti-skid, how the results are measured and the standards behind it.
Access cover being installed

Knowledge Base / Standards and conformity

National Highways skid resistance requirements

CD 534 v0.2.0 defines skid resistance test requirements that are based on a WRc test method for BS EN 124 conforming coarse textured cover surfaces. This article guides you through the test and our conformance.
Access cover hero image

Knowledge Base / Product and specification guidance

Manhole cover range comparison chart

A comprehensive feature comparison of our market leading Tristar, Highway and Unite ranges of access cover.
Access cover being installed

Knowledge Base / Standards and conformity

A guide to Standards for Highways CD 534 V0.2.0

"CD 534 Chamber tops and gully tops for road drainage and services" has been revised, and is now at v0.2.0 as of September 2025. This knowledge base article will guide you through the key requirements and updates in Standards for Highways CD 534 v0.2.0.
  1. All information provided is subject to change without notice. While every effort is made to ensure accuracy and relevance, Wrekin Products Ltd. does not warrant the completeness or reliability of the information contained herein. Photographs, illustrations, and other visual materials are provided for illustrative purposes only. Wrekin Products Ltd. reserves the right to make design amendments or improvements to any product at any time, where such changes enhance performance or durability, without affecting compliance with the stated standards. Where errors or omissions are identified, amendments will be made as quickly as possible.
  2. It is the responsibility of all users to satisfy themselves the above data is current.
  3. All values stated are nominal within 2.5% tolerance.
  4. Installation details are available in the knowledge base.
  5. All Wrekin products are supplied subject to our Terms and Conditions of Sale.
Share this page