Home
My Wrekin
Access cover being installed

H2GO gully chute connector with 480x320 gully grating product guide

Introduction

Our 480x320mm Clear Opening D400 Gully Gratings are specifically designed to be fitted onto a standard Wrekin Gully Chute Connector unit in a Group 3 location, flush with the surrounding road or pavement surface.

By utilising this combination, the Gully Grating assembly benefits from robust and coherent support of its frame flange, thereby maximising the installation life expectancy.

Water evacuation through this apparatus from the surrounding road or pavement surface can be provided by attachment of the Gully Chute Connector’s 150/160mm O/D. pipe spigot*, to a suitable drainage system. All that is required to connect the two units together is an intermediate layer of Unipak bedding mortar, which can also act as Gully Grating level adjustment material.

*The spigot can accommodate either of the two pipe sizes and can be site-cut to length for drainage system adjustment purposes.

Gallery

  • The Gully Chute Connector replaces a traditional gully pot, allowing the Gully Grating to be placed in its usual position.
    The Gully Chute Connector replaces a traditional gully pot, allowing the Gully Grating to be placed in its usual position.
  • The Gully Grating fitment is fully supported around the whole of its frame flange.
    The Gully Grating fitment is fully supported around the whole of its frame flange.
  • Ideal placement of the Gully Grating is afforded by the Gully Chute’s long pipe spigot(s) and absence of lateral restraints.
    Ideal placement of the Gully Grating is afforded by the Gully Chute’s long pipe spigot(s) and absence of lateral restraints.
  • The Gully Chute Connector itself should be fully supported underneath with mass concrete of the same grade used to bed the adjoining kerb.
    The Gully Chute Connector itself should be fully supported underneath with mass concrete of the same grade used to bed the adjoining kerb.
  • The Gully Grating is intended to be located on our Gully Chute Connector with a layer of UniPak bedding mortar between them.
    The Gully Grating is intended to be located on our Gully Chute Connector with a layer of UniPak bedding mortar between them.
  •  Final in-situ Gully Grating and Gully Chute Connector assembly (road construction and bedding enveloping of flange hidden for clarity).
     Final in-situ Gully Grating and Gully Chute Connector assembly (road construction and bedding enveloping of flange hidden for clarity).
  • Once the foundations have cured, a drainage pipe socket of 150/160mm I/D may be attached to the spigot of the Gully Chute Connector.
    Once the foundations have cured, a drainage pipe socket of 150/160mm I/D may be attached to the spigot of the Gully Chute Connector.
  • The Gully Chute Connector replaces a traditional gully pot, allowing the Gully Grating to be placed in its usual position.
  • The Gully Grating fitment is fully supported around the whole of its frame flange.
  • Ideal placement of the Gully Grating is afforded by the Gully Chute’s long pipe spigot(s) and absence of lateral restraints.
  • The Gully Chute Connector itself should be fully supported underneath with mass concrete of the same grade used to bed the adjoining kerb.
  • The Gully Grating is intended to be located on our Gully Chute Connector with a layer of UniPak bedding mortar between them.
  •  Final in-situ Gully Grating and Gully Chute Connector assembly (road construction and bedding enveloping of flange hidden for clarity).
  • Once the foundations have cured, a drainage pipe socket of 150/160mm I/D may be attached to the spigot of the Gully Chute Connector.

Related pages

Product range

H2GO Gully Chute Connector

The H2GO gully chute connector is designed to fix below a grating or kerb type gully unit with a primary catchment chamber and spigot outlet for onward pipe connection. These are ideal where gully grates are offset to gully pots, or where direct surface run off is required.

Related products

Stock code Range Clear opening
(mm)		 Overall frame
(mm)		 Frame depth
(mm)		 Options My Wrekin
DGK115/HB/K 495 x 345 645 x 445 150

Stock code Range Clear opening
(mm)		 Base opening
(mm)		 Overall frame
(mm)		 Frame depth
(mm)		 Waterway area
(cm²)		 Options My Wrekin
DGHT0D4/5035/KH Highway 480 x 320 500 x 350 675 x 445 100 950

Stock code Description My Wrekin
DGCC/6545/G H2GO gully chute connector 655mm x 450mm x 185mm with 150mm and 160mm spigot sizes
Share this page