|
Geoworks has replaced Wrekin Geosynthetics, our geosynthetics products are available at Geoworks.eco Our Solutions Active TravelWe support the development of active travel infrastructure across the UK in alignment with guidance from Active Travel England. Our range includes products such as pedestrian gully gratings and kerb drainage systems used within pedestrian and cycling routes. These products are specified within projects that form part of wider active travel infrastructure programmes. 
Our range of Highway gully gratings are fully compliant with the requirements of specification clause 6.2.47 of Cycle Infrastructure Design Local Transport Note 1/20 Pedestrian-Friendly GratingsOur pedestrian-friendly Unite gratings feature a secondary grating and provide safe, comfortable access for all users, including those with mobility challenges. These solutions are crucial for developing inclusive active travel networks, ensuring that walking and wheeling are viable and attractive options for short journeys within towns and cities. Whilst BS EN 124 provides no definition for a ‘Pedestrianised’ grating, there is an allowance in the Standard to reduce drainage apertures down to 5mm wide, where these may be preferred. However, this restriction is avoided, wherever possible, as such gratings may not satisfy a scheme’s drainage requirements unless its lower waterway area is taken account of in the scheme’s design calculations. Therefore, pedestrianised gratings need to balance aperture size that prevents wheels and shoes from becoming lodged in its slot apertures, with the required waterway (drainage) area. CD 534: Chamber Tops and Gully Tops for Road Drainage and Services, now at version 0.2.0. is here Find out more
Pedestrian friendly gully gratesIn theory, gratings compliant with BS EN 124 are suitable for use within pedestrian and cycle environments. The Cycle Infrastructure Design Local Transport Note 1/20 advises against the use of slot drain-type gratings. The majority of our gratings fall within this category. The gully gratings listed below incorporate features intended for pedestrian use.
PSRV 70+ Across the RangeOur products are manufactured with surface finishes that achieve a Paving Surface Reflectance Value (PSRV) of 70+. This surface characteristic supports their use within pedestrian and cycle route environments where surface texture forms part of the specification for active travel infrastructure. ScrewLift, Unipak and Uniform can be used together as part of an ironwork installation system. These products are supplied for use during installation of access covers and frames within road and infrastructure environments. The system supports installation processes associated with ironwork placement and chamber adjustment, with products supplied for projects involving road and active travel infrastructure. 
Unipak & Uniform
Unipak is a BBA HAPAS certified rapid-set, high-strength, polyester resin bedding mortar system developed, tested and proven for highway use. It is designed to prevent the most common causes of bedding failure, minimising disruption and inconvenience to road users while improving safety for operatives.
Screwlift
ScrewLift is our rapid manhole frame levelling system and is suitable for use with nearly all of our D400 and E600 manhole covers and gully grates.
ScrewLift is very straight forward to use and can be installed with any bedding mortar. 
Unite
When installed with either our Unipak polymer resin bedding mortar or Instarmac Envirobed® CD534 flowable bedding mortar, the Unite range is available with a 10-year product warranty.
Due to its design and overwhelming success in the local authority and utilities sector, Unite is the proven choice for longevity for highway ironwork installations. 
H2GO Kerb DrainageThe H2GO kerb drainage system is used within infrastructure projects to manage surface water along kerb lines, including locations associated with pedestrian and cycle routes. Drainage provision forms part of the specification for footpaths and cycle lanes where surface water management is required. H2GO is a BS EN 124 D400 and BS 7903 combined kerb and drainage unit intended for site fitment onto a gully chute connector unit in a Group 3 location. The H2GO assembly allows inspection, cleaning and rodding access via a hinged top lid. The H2GO unit comprises a main body with a BS EN 1340 half-batter kerb profile, a stainless steel turnbuckle lock operated with a dedicated key, a reversible side-hinged lid, and an adjustable road retaining bar. 
A supportive teamWe have developed a strong reputation in the civil engineering services sector thanks to the wealth of experience of our skilled teams. We offer technical expertise, with customer support tailored to your needs. Our team works with asset owners, developers, main contractors, ground workers and local authorities throughout a construction scheme’s lifecycle, including: Initial project supportListening and working with customers to fully understand their requirements. We provide pre-tender and tender support to lend a competitive edge. Product specificationOur technical experts and value engineering service means that you have access to advice and support. Design schemesOur talented team provides full design services, with the added bonus of supporting documentation and drawings. Advice and site meetingsWe understand the value of regular site meetings, helping to improve communication, giving installation advice and ensuring each project is completed successfully, right down to the project review 
Contact usWhether you are looking for live project support, or are in the initial stages of specification, we are always on hand and happy to help. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
