Notes
Pack contents (1 set):
• Bolts: 4
• Plastic brushes: 4
• Allen Keys: 1
• 5mm Hex Screw Bit: 1
• Total Components: 10
Installation instructions:
1. Insert all of the plastic brushes into the corners of the flange from the underside of the frame.
2. Screw the levelling bolts into the brushes from the top side.
3. Using a spirit level or a straight edge on top of the frame, wind down the bolts to achieve the correct level to match the ground/ road surface.
4. Apply the bedding mortar to the manufacturers’ requirements.
