Composite modular ladder installation guide

Composite modular ladder system for foul, storm and potable water applications.

Our light and strong composite ladders are fabricated from reinforced thermoplastic, made in the UK to ISO9001 quality standards and fully tested to BS 14396 by Lloyds British PLC and are CE marked.

All of our composite ladders are resistant to chemicals and are available in different colours for varying applications:

• Our grey and black ladders are for potable and stormwater
• The yellow is suitable for contact with sewage.

This modular system has a much lower whole-life cost than ladders made in galvanised and stainless steel materials. 

Using a rubber mallet join the ladder sections together

Make sure the stringer is the correct way up and click the ladder rungs into place using a rubber mallet and then insert rung stops again using a rubber mallet.

 Turn over and repeat step 2 clicking the rungs into place.

 Using a rubber mallet to knock the rung stops into place.

 Add the next section of the ladder stringer as per step 1.

 Turn the ladder over and add the opposite ladder stringer.

Insert and click into place the balance of the rungs

 Add the rung stops as step 4.

 Cut to the required length using an appropriate saw

 Cut to the required length using an appropriate saw