ClickLift™

Manhole cover frame raising system

ClickLift™ is an innovative, patented and BSi Kitemarked system which provides a rapid solution to raising selected standard Wrekin manhole frames.

ClickLift™ eliminates the time and resources required to dig out and reinstall frames to suit the final road surface layer.

The ClickLift™ accessory is designed and Kitemarked, with the range allowing incremental depth increases between 30 to 60mm, to suit most road-surface finish-depths.

ClickLift™ is dispatched with a black anti-corrosion coating, identical to our manhole covers and gully grates and is only illustrated in yellow for visual purposes.

Key features

D400 For use in a Group 4 Class D400 carriageway environment
BD EN 124 Compliant with BS EN 124:2015
kitemark Third party certified by BSI
Complies with Highways England’s DMRB CD 534 and MCHW Series 500
non-rock Three point suspension on covers for non-rock stability
indexed covers Indexed product ensure correct fitting
ductile iron Manufactured from strong and highly durable ductile iron
Installation level – Simple

ClickLift™ installed with Highway®

Below is a through section diagram illustrating how ClickLift™ fits onto a TriStar™ or Highway® manhole cover frame.

ClickLift™ image gallery

ClickLift™

Wrekin
product
code
Clear
opening
size (mm)
ClickLift™
depth/height
extension (mm)
Marking
on
product
CLICKLIFT6030 600 x 600 30 600 x 600 x 30mm
CLICKLIFT6040 600 x 600 40 600 x 600 x 40mm
CLICKLIFT6050 600 x 600 50 600 x 600 x 50mm
CLICKLIFT6060 600 x 600 60 600 x 600 x 60mm
CLICKLIFT6730 675 x 675 30 675 x 675 x 30mm
CLICKLIFT6740 675 x 675 40 675 x 675 x 40mm
CLICKLIFT6750 675 x 675 50 675 x 675 x 50mm
CLICKLIFT6760 675 x 675 60 675 x 675 x 60mm

 

ClickLift™ + Highway®

Wrekin
product
code
Clear
opening
size (mm)
ClickLift™
depth/height
extension (mm)
Marking
on
product
DMT0D4/6060/KHCL3 600 x 600 30 600 x 600 x 30mm
DMT0D4/6060/KHCL4 600 x 600 40 600 x 600 x 40mm
DMT0D4/6060/KHCL5 600 x 600 50 600 x 600 x 50mm
DMT0D4/6060/KHCL6 600 x 600 60 600 x 600 x 60mm
DMT0D6/6060/KHCL3 600 x 600 30 600 x 600 x 30mm
DMT0D6/6060/KHCL4 600 x 600 40 600 x 600 x 40mm
DMT0D6/6060/KHCL5 600 x 600 50 600 x 600 x 50mm
DMT0D6/6060/KHCL6 600 x 600 60 600 x 600 x 60mm
DMT0D4/6767/KHCL3 675 x 675 30 675 x 675 x 30mm
DMT0D4/6767/KHCL4 675 x 675 40 675 x 675 x 40mm
DMT0D4/6767/KHCL5 675 x 675 50 675 x 675 x 50mm
DMT0D4/6767/KHCL6 675 x 675 60 675 x 675 x 60mm
DMT0D6/6767/KHCL3 675 x 675 30 675 x 675 x 30mm
DMT0D6/6767/KHCL4 675 x 675 40 675 x 675 x 40mm
DMT0D6/6767/KHCL5 675 x 675 50 675 x 675 x 50mm
DMT0D6/6767/KHCL6 675 x 675 60 675 x 675 x 60mm

Available options for Manhole Covers:

Locked; Badged ‘SW’, ‘FW’ ect.); Ventilation holes; Sealing plate; Safety grill; Anti-slip coating (60+ PSRV)

ClickLift™ + TriStar™

Wrekin
product
code
Clear
opening
size (mm)
ClickLift™
depth/height
extension (mm)
Marking
on
product
DMT0D4/6060/KTCL3 600 x 600 30 600 x 600 x 30mm
DMT0D4/6060/KTCL4 600 x 600 40 600 x 600 x 40mm
DMT0D4/6060/KTCL5 600 x 600 50 600 x 600 x 50mm
DMT0D4/6060/KTCL6 600 x 600 60 600 x 600 x 60mm
DMT0D6/6060/KTCL3 600 x 600 30 600 x 600 x 30mm
DMT0D6/6060/KTCL4 600 x 600 40 600 x 600 x 40mm
DMT0D6/6060/KTCL5 600 x 600 50 600 x 600 x 50mm
DMT0D6/6060/KTCL6 600 x 600 60 600 x 600 x 60mm
DMT0D4/6060/KTCL6 675 x 675 30 675 x 675 x 30mm
DMT0D4/6060/KTCL6 675 x 675 40 675 x 675 x 40mm
DMT0D4/6060/KTCL6 675 x 675 50 675 x 675 x 50mm
DMT0D4/6060/KTCL6 675 x 675 60 675 x 675 x 60mm
DMT0D6/6767/KTCL3 675 x 675 30 675 x 675 x 30mm
DMT0D6/6767/KTCL4 675 x 675 40 675 x 675 x 40mm
DMT0D6/6767/KTCL5 675 x 675 50 675 x 675 x 50mm
DMT0D6/6767/KTCL6 675 x 675 60 675 x 675 x 60mm

Available options for Manhole Covers:

Locked; Badged ‘SW’, ‘FW’ ect.); Ventilation holes; Sealing plate; Safety grill; Anti-slip coating (60+ PSRV)

Before ClickLift™

So, what is ClickLift™ designed to do? It’s common practice for manhole covers to be installed in the early stages of a housing development, well before the final tarmac is laid. This means there are two typical options:

OPTION 1 – High Damage Risk:

The cover is installed proud of the binding layer, leaving the manhole cover frame susceptible to construction traffic damage.

OPTION 2 – The Dig Out, Expensive and Disruptive:

The cover is installed level with the binding layer. To raise the cover to the level of the final surface layer (typically 30-60mm) it is then necessary to dig out the entire unit with all the associated costs and complications.

ClickLift™ raises Wrekin Highway® and TriStar™ frames to suit the final surface layer – without the need for digging out and re-installing. The new patented product is kitemarked by BSi and is available in four fixed incremental depths – 30/40/50/60mm – for two clear openings – 600/675mm.

Know your limits…

When selecting D400 grade covers for developments specifiers can overlook that the forces exerted by site traffic will exceed those for which the covers were designed. Metal tracks, rollers and solid tyres all have a high point loading.

Calculate your savings using using ClickLift™

  • Datasheets:

    ClickLift™ Guide

    1.1mb | Version v19.CE | PDF format

    ClickLift™ Guide
  • Downloads:

    ClickLift™ Install Section Drawing

    1.2MB | Version v4.CE | PDF format

    ClickLift™ Do's and Don'ts

    1 MB | Version V7.CE | PDF format

Testimonials:

Groundworks and civil engineering contractor NRI Civils has been trialling the ClickLift™ ironwork raising system with its clients.

“I was delighted with the ease and simplicity with which it can be installed on site. The time, cost and disruption saved by this innovative solution will prove to be of great advantage of our groundworks team” Adam Moody – Contracts manager, NRI Civils

Civil engineering contractor Barconn Limited has also trialed the ClickLift™ ironwork raising system on one of its developments.